| E_interaction {lattice} | R Documentation |
The classic Trellis paradigm is to plot the whole object at once, without the possibility of interacting with it afterwards. However, by keeping track of the grid viewports where the panels and strips are drawn, it is possible to go back to them afterwards and enhance them one panel at a time. These functions provide convenient interfaces to help in this. Note that these are still experimental and the exact details may change in future.
panel.identify(x, y = NULL,
subscripts = seq_along(x),
labels = subscripts,
n = length(x), offset = 0.5,
threshold = 18, ## in points, roughly 0.25 inches
panel.args = trellis.panelArgs(),
...)
panel.identify.qqmath(x, distribution, groups, subscripts, labels,
panel.args = trellis.panelArgs(),
...)
panel.identify.cloud(x, y, z, subscripts,
perspective, distance,
xlim, ylim, zlim,
screen, R.mat, aspect, scales.3d,
...,
panel.3d.identify,
n = length(subscripts),
offset = 0.5,
threshold = 18,
labels = subscripts,
panel.args = trellis.panelArgs())
panel.link.splom(threshold = 18, verbose = getOption("verbose"), ...)
panel.brush.splom(threshold = 18, verbose = getOption("verbose"), ...)
trellis.vpname(name = c("position", "split", "split.location", "toplevel",
"figure", "panel", "strip", "strip.left",
"legend", "legend.region", "main", "sub",
"xlab", "ylab", "xlab.top", "ylab.right", "page"),
column, row,
side = c("left", "top", "right", "bottom", "inside"),
clip.off = FALSE, prefix)
trellis.grobname(name,
type = c("", "panel", "strip", "strip.left",
"key", "colorkey"),
group = 0,
which.given = lattice.getStatus("current.which.given",
prefix = prefix),
which.panel = lattice.getStatus("current.which.panel",
prefix = prefix),
column = lattice.getStatus("current.focus.column",
prefix = prefix),
row = lattice.getStatus("current.focus.row",
prefix = prefix),
prefix = lattice.getStatus("current.prefix"))
trellis.focus(name, column, row, side, clip.off,
highlight = interactive(), ..., prefix,
guess = TRUE, verbose = getOption("verbose"))
trellis.switchFocus(name, side, clip.off, highlight, ..., prefix)
trellis.unfocus()
trellis.panelArgs(x, packet.number)
x, y, z |
variables defining the contents of the panel. In the
case of |
n |
the number of points to identify by default (overridden by a right click) |
subscripts |
an optional vector of integer indices associated with each point. See details below. |
labels |
an optional vector of labels associated with each point. Defaults
to |
distribution, groups |
typical panel arguments of
|
offset |
the labels are printed either below, above, to the left or to the
right of the identified point, depending on the relative location of
the mouse click. The |
threshold |
threshold in grid's |
panel.args |
list that contains components names |
perspective, distance, xlim, ylim, zlim, screen, R.mat, aspect,
scales.3d |
arguments as passed to |
panel.3d.identify |
the function that is responsible for the actual interaction once the
data rescaling and rotation computations have been done. By
default, an internal function similar to |
name |
A character string indicating which viewport or grob we are looking for. Although these do not necessarily provide access to all viewports and grobs created by a lattice plot, they cover most of the ones that end-users may find interesting.
If When |
column, row |
integers, indicating position of the panel or strip that should be
assigned focus in the Trellis layout. Rows are usually calculated
from the bottom up, unless the plot was created with
|
guess |
logical. If |
side |
character string, relevant only for legends (i.e., when
|
clip.off |
logical, whether clipping should be off, relevant when |
type |
A character string specifying whether the grob is specific to a particular panel or strip. When |
group |
An integer specifying whether the grob is specific to a particular group within the plot. When |
which.given, which.panel |
integers, indicating which conditional variable is being represented (within a strip) and the current levels of the conditional variables. When |
prefix |
A character string acting as a prefix identifying the plot of a
Users should not usually need to supply a value for this argument except to interact with an existing plot other than the one plotted last. For |
highlight |
logical, whether the viewport being assigned focus should be
highlighted. For |
packet.number |
integer, which panel to get data from. See
|
verbose |
whether details will be printed |
... |
For |
panel.identify is similar to identify. When
called, it waits for the user to identify points (in the panel being
drawn) via mouse clicks. Clicks other than left-clicks terminate the
procedure. Although it is possible to call it as part of the panel
function, it is more typical to use it to identify points after
plotting the whole object, in which case a call to
trellis.focus first is necessary.
panel.link.splom is meant for use with splom,
and requires a panel to be chosen using trellis.focus before it
is called. Clicking on a point causes that and the corresponding
proections in other pairwise scatter plots to be highlighted.
panel.brush.splom is a (misnamed) alias for
panel.link.splom, retained for back-compatibility.
panel.identify.qqmath is a specialized wrapper meant for use
with the display produced by qqmath.
panel.identify.qqmath is a specialized wrapper meant for use
with the display produced by cloud. It would be unusual
to call them except in a context where default panel function
arguments are available through trellis.panelArgs (see below).
One way in which panel.identify etc. are different from
identify is in how it uses the subscripts
argument. In general, when one identifies points in a panel, one
wants to identify the origin in the data frame used to produce the
plot, and not within that particular panel. This information is
available to the panel function, but only in certain situations. One
way to ensure that subscripts is available is to specify
subscripts = TRUE in the high level call such as xyplot.
If subscripts is not explicitly specified in the call to
panel.identify, but is available in panel.args, then
those values will be used. Otherwise, they default to
seq_along(x). In either case, the final return value will be
the subscripts that were marked.
The process of printing (plotting) a Trellis object builds up a grid layout with named viewports which can then be accessed to modify the plot further. While full flexibility can only be obtained by using grid functions directly, a few lattice functions are available for the more common tasks.
trellis.focus can be used to move to a particular panel or
strip, identified by its position in the array of panels. It can also
be used to focus on the viewport corresponding to one of the labels or
a legend, though such usage would be less useful. The exact
viewport is determined by the name along with the other
arguments, not all of which are relevant for all names. Note that
when more than one object is plotted on a page, trellis.focus
will always go to the plot that was created last. For more
flexibility, use grid functions directly (see note below).
After a successful call to trellis.focus, the desired viewport
(typically panel or strip area) will be made the ‘current’
viewport (plotting area), which can then be enhanced by calls to
standard lattice panel functions as well as grid functions.
It is quite common to have the layout of panels chosen when a
"trellis" object is drawn, and not before then. Information on
the layout (specifically, how many rows and columns, and which packet
belongs in which position in this layout) is retained for the last
"trellis" object plotted, and is available through
trellis.currentLayout.
trellis.unfocus unsets the focus, and makes the top level
viewport the current viewport.
trellis.switchFocus is a convenience function to switch from
one viewport to another, while preserving the current row and
column. Although the rows and columns only make sense for
panels and strips, they would be preserved even when the user switches
to some other viewport (where row/column is irrelevant) and then
switches back.
Once a panel or strip is in focus, trellis.panelArgs can be
used to retrieve the arguments that were available to the panel
function at that position. In this case, it can be called without
arguments as
trellis.panelArgs()This usage is also allowed when a
"trellis" object is being
printed, e.g. inside the panel functions or the axis function (but not
inside the prepanel function). trellis.panelArgs can also
retrieve the panel arguments from any "trellis" object. Note
that for this usage, one needs to specify the packet.number (as
described under the panel entry in xyplot) and
not the position in the layout, because a layout determines the panel
only after the object has been printed.
It is usually not necessary to call trellis.vpname and
trellis.grobname directly. However, they can be useful in
generating appropriate names in a portable way when using grid
functions to interact with the plots directly, as described in the
note below.
panel.identify returns an integer vector containing the
subscripts of the identified points (see details above). The
equivalent of identify with pos=TRUE is not yet
implemented, but can be considered for addition if requested.
trellis.panelArgs returns a named list of arguments that were
available to the panel function for the chosen panel.
trellis.vpname and trellis.grobname return character
strings.
trellis.focus has a meaningful return value only if it has been
used to focus on a panel interactively, in which case the return value
is a list with components col and row giving the column
and row positions respectively of the chosen panel, unless the choice
was cancelled (by a right click), in which case the return value is
NULL. If click was outside a panel, both col and
row are set to 0.
The viewports created by lattice are accessible to the user through
trellis.focus as described above. Functions from the grid
package can also be used directly. For example,
current.vpTree can be used to
inspect the current viewport tree and
seekViewport or
downViewport can be used to navigate to
these viewports. For such usage, trellis.vpname and
trellis.grobname provides a portable way to access the
appropriate viewports and grobs by name.
Deepayan Sarkar Deepayan.Sarkar@R-project.org. Felix
Andrews provided initial implementations of
panel.identify.qqmath and support for focusing on panels
interctively.
identify, Lattice,
print.trellis, trellis.currentLayout,
current.vpTree,
viewports
## Not run:
xyplot(1:10 ~ 1:10)
trellis.focus("panel", 1, 1)
panel.identify()
## End(Not run)
xyplot(Petal.Length ~ Sepal.Length | Species, iris, layout = c(2, 2))
Sys.sleep(1)
trellis.focus("panel", 1, 1)
do.call("panel.lmline", trellis.panelArgs())
Sys.sleep(0.5)
trellis.unfocus()
trellis.focus("panel", 2, 1)
do.call("panel.lmline", trellis.panelArgs())
Sys.sleep(0.5)
trellis.unfocus()
trellis.focus("panel", 1, 2)
do.call("panel.lmline", trellis.panelArgs())
Sys.sleep(0.5)
trellis.unfocus()
## choosing loess smoothing parameter
p <- xyplot(dist ~ speed, cars)
panel.loessresid <-
function(x = panel.args$x,
y = panel.args$y,
span,
panel.args = trellis.panelArgs())
{
fm <- loess(y ~ x, span = span)
xgrid <- do.breaks(current.panel.limits()$xlim, 50)
ygrid <- predict(fm, newdata = data.frame(x = xgrid))
panel.lines(xgrid, ygrid)
pred <- predict(fm)
## center residuals so that they fall inside panel
resids <- y - pred + mean(y)
fm.resid <- loess.smooth(x, resids, span = span)
##panel.points(x, resids, col = 1, pch = 4)
panel.lines(fm.resid, col = 1)
}
spans <- c(0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8)
update(p, index.cond = list(rep(1, length(spans))))
panel.locs <- trellis.currentLayout()
i <- 1
for (row in 1:nrow(panel.locs))
for (column in 1:ncol(panel.locs))
if (panel.locs[row, column] > 0)
{
trellis.focus("panel", row = row, column = column,
highlight = FALSE)
panel.loessresid(span = spans[i])
grid::grid.text(paste("span = ", spans[i]),
x = 0.25,
y = 0.75,
default.units = "npc")
trellis.unfocus()
i <- i + 1
}