Classes {methods} | R Documentation |
Class definitions are objects that contain the formal definition of a
class of R objects, usually referred to as an S4 class, to
distinguish them from the informal S3 classes.
This document gives an overview of S4 classes; for
details of the class representation objects, see help for the class
classRepresentation
.
When a class is defined, an object is stored that contains the
information about that class. The object, known as the
metadata defining the class, is not stored under the name of
the class (to allow programmers to write generating functions of
that name), but under a specially constructed name.
To examine the class definition, call getClass
. The
information in the metadata object includes:
The data contained in an object from an S4 class is defined by the slots in the class definition.
Each slot in an object is a component of the object;
like components (that is, elements) of a
list, these may be extracted and set, using the
function slot()
or more often the operator
"@"
. However, they
differ from list components in important ways.
First, slots can only be referred to by name, not by position,
and there is no partial matching of names as with list elements.
All the objects from a particular class have the same set of slot
names; specifically, the slot names that are contained in the
class definition. Each slot in each object always is an object
of the
class specified for this slot in the definition of the current class.
The word “is” corresponds to the R function of the same
name (is
), meaning that the class of the object in
the slot must be the same as the class specified in the
definition, or some class that extends the one in the
definition (a subclass).
A special slot name, .Data
, stands for the
‘data part’ of the object. An object from a class with a
data part is defined by specifying that the class contains one
of the R object types or one of the special pseudo-classes,
matrix
or array
, usually because the definition of
the class, or of one of its superclasses, has included the type
or pseudo-class in its contains
argument. A second
special slot name, .xData
, is used to enable inheritance
from abnormal types such as "environment"
See the section on inheriting from non-S4 classes
for details on the representation and
for the behavior of S3 methods with objects from these classes.
Some slot names correspond to attributes used in old-style S3
objects and in R objects without an explicit class, for
example, the names
attribute. If you define a class for
which that attribute will be set, such as a subclass of named
vectors, you should include "names"
as a slot. See the
definition of class "namedList"
for an example. Using the
names()
assignment to set such names will generate a
warning if there is no names slot and an error if the object in
question is not a vector type. A slot called "names"
can
be used anywhere, but only if it is assigned as a slot, not via
the default names()
assignment.
The definition of a class includes the superclasses —the
classes that this class extends. A
class Fancy
, say, extends a class Simple
if an
object from the Fancy
class has all the capabilities of
the Simple
class (and probably some more as well). In
particular, and very usefully, any method defined to work for a
Simple
object can be applied to a Fancy
object as
well.
This relationship is expressed equivalently by saying that
Simple
is a superclass of Fancy
, or that
Fancy
is a subclass of Simple
.
The direct superclasses of a class are those superclasses
explicitly defined. Direct superclasses can be defined in
three ways. Most commonly, the superclasses are listed in the
contains=
argument in the call to setClass
that creates the subclass. In this case the subclass will
contain all the slots of the superclass, and the relation
between the class is called simple, as it in fact is.
Superclasses can also be defined
explicitly by a call to setIs
; in this case, the
relation requires methods to be specified to go from subclass to
superclass. Thirdly, a class union is a superclass of all the
members of the union. In this case too the relation is simple,
but notice that the relation is defined when the superclass is
created, not when the subclass is created as with the
contains=
mechanism.
The definition of a superclass will also potentially contain its own direct superclasses. These are considered (and shown) as superclasses at distance 2 from the original class; their direct superclasses are at distance 3, and so on. All these are legitimate superclasses for purposes such as method selection.
When superclasses are defined by including the names of
superclasses in the contains=
argument to
setClass
, an object from the class will have all the
slots defined for its own class and all the slots defined
for all its superclasses as well.
The information about the relation between a class and a
particular superclass is encoded as an object of class
SClassExtension
. A list of such objects for
the superclasses (and sometimes for the subclasses) is included in
the metadata object defining the class. If you need to compute
with these objects (for example, to compare the distances), call
the function extends
with argument fullInfo=TRUE
.
The objects from a class created by a call to
new
are defined by the prototype object for the class and by
additional arguments in the call to new
, which are
passed to a method for that class for the function
initialize
.
Each class representation object contains a prototype object
for the class (although for a virtual class the prototype may be
NULL
). The prototype object must have values for all the
slots of the class.
By default, these are the prototypes of the corresponding slot
classes. However, the definition of the class can specify any
valid object for any of the slots.
Classes exist for which no actual objects can be created by a
call to new
, the
virtual classes, in fact a
very important programming tool. They are used to group together
ordinary classes that want to share some programming behavior,
without necessarily restricting how the behavior is implemented.
Virtual class definitions may if you want include
slots (to provide some common behavior without fully defining
the object—see the class traceable
for an example).
A simple and useful form of virtual class is the class
union, a virtual class that is defined in a call to
setClassUnion
by listing one or
more of subclasses (classes that extend the class union). Class
unions can include as subclasses basic object types (whose
definition is otherwise sealed).
There are a number of ‘basic’ classes, corresponding to the
ordinary kinds of data occurring in R. For example,
"numeric"
is a class corresponding to numeric vectors.
The other vector basic classes are "logical"
, "integer"
,
"complex"
, "character"
, "raw"
, "list"
and "expression"
.
The prototypes for
the vector classes are vectors of length 0 of the corresponding
type. Notice that basic classes are unusual in that the
prototype object is from the class itself.
In addition to the vector classes there are also basic classes
corresponding to objects in the
language, such as "function"
and "call"
.
These classes are subclasses of the virtual class "language"
.
Finally, there are object types and corresponding basic classes for
“abnormal” objects, such as "environment"
and
"externalptr"
.
These objects do not follow the
functional behavior of the language; in particular, they are not
copied and so cannot have attributes or slots defined locally.
All these classes can be used as slots or as superclasses for any other class definitions, although they do not themselves come with an explicit class. For the abnormal object types, a special mechanism is used to enable inheritance as described below.
A class definition can extend classes other than
regular S4 classes, usually by specifying them in the
contains=
argument to setClass
. Three groups
of such classes behave distinctly:
S3 classes, which must have been registered by a previous call to
setOldClass
(you can check that this has been done
by calling getClass
, which should return a class that
extends oldClass);
One of the R object types, typically a vector type, which then
defines the type of the S4 objects, but also a type such as
environment
that can not be used directly as a type
for an S4 object. See
below.
One of the pseudo-classes matrix
and array
, implying objects with
arbitrary vector types plus the dim
and dimnames
attributes.
This section describes the approach to combining S4 computations with older S3 computations by using such classes as superclasses. The design goal is to allow the S4 class to inherit S3 methods and default computations in as consistent a form as possible.
As part of a general effort to make the S4 and S3 code in R more
consistent, when objects from an S4 class are used as the first
argument to a non-default S3 method, either for an S3 generic function
(one that calls UseMethod
) or for one of the primitive
functions that dispatches S3 methods, an effort is made to provide a
valid object for that method. In particular, if the S4 class extends
an S3 class or matrix
or array
, and there is an S3
method matching one of these classes, the S4 object will be coerced to
a valid S3 object, to the extent that is possible given that there is
no formal definition of an S3 class.
For example, suppose "myFrame"
is an S4 class that includes the
S3 class "data.frame"
in the contains=
argument to
setClass
. If an object from this S4 class is passed to
a function, say as.matrix
, that has an S3 method for
"data.frame"
, the internal code for UseMethod
will convert the object to a data frame; in particular, to an S3
object whose class attribute will be the vector corresponding to the
S3 class (possibly containing multiple class names). Similarly for an
S4 object inheriting from "matrix"
or "array"
, the S4
object will be converted to a valid S3 matrix or array.
Note that the conversion is not applied when an S4 object is
passed to the default S3 method. Some S3 generics attempt to deal
with general objects, including S4 objects. Also, no transformation
is applied to S4 objects that do not correspond to a selected S3
method; in particular, to objects from a class that does not contain
either an S3 class or one of the basic types. See asS4
for the transformation details.
In addition to explicit S3 generic functions, S3 methods are defined for a variety of operators and functions implemented as primitives. These methods are dispatched by some internal C code that operates partly through the same code as real S3 generic functions and partly via special considerations (for example, both arguments to a binary operator are examined when looking for methods). The same mechanism for adapting S4 objects to S3 methods has been applied to these computations as well, with a few exceptions such as generating an error if an S4 object that does not extend an appropriate S3 class or type is passed to a binary operator.
The remainder of this section discusses the mechanisms for
inheriting from basic object types. See matrix
or array
for inhering from the matrix and array
pseudo-classes, or from time-series. For the
corresponding details for inheritance
from S3 classes, see setOldClass
.
An object from a class that directly and simply contains one
of the basic object types in R, has implicitly a corresponding
.Data
slot of that type, allowing computations to extract
or replace the data part while leaving other slots
unchanged. If the type is one that can accept attributes and is
duplicated normally, the inheritance also determines the type of the
object; if the class definition has a .Data
slot
corresponding to a normal type, the class of the
slot determines the type of the object (that is, the value of
typeof(x)
).
For such classes, .Data
is a pseudo-slot; that
is, extracting or setting it modifies the non-slot data in the
object. The functions getDataPart
and
setDataPart
are a cleaner, but essentially
equivalent way to deal with the data part.
Extending a basic type this way allows objects to
use old-style code for the corresponding type as well as S4
methods. Any basic type can be used for .Data
, but
a few types are treated differently because they do not behave like ordinary objects;
for example, "NULL"
, environments, and external pointers.
Classes extend these types by having a slot, .xData
,
itself inherited from an internally defined S4 class. This
slot actually contains an object of the inherited type, to
protect computations from the reference semantics of the type.
Coercing to the nonstandard object type then requires an
actual computation, rather than the "simple"
inclusion
for other types and classes. The intent is that programmers
will not need to take account of the mechanism, but one
implication is that you should not explicitly use the
type of an S4 object to detect inheritance from an arbitrary
object type. Use
is
and similar functions instead.
Chambers, John M. (2008) Software for Data Analysis: Programming with R Springer. (For the R version.)
Chambers, John M. (1998) Programming with Data Springer (For the original S4 version.)
Chambers, John M. and Hastie, Trevor J. eds (1992) Statistical Models in S. Wadsworth & Brooks/Cole (Appendix A for S3 classes.)
Becker, R. A., Chambers, J. M. and Wilks, A. R. (1988) The New S Language. Wadsworth & Brooks/Cole. (Out of print.) (The description of vectors, matrix, array and time-series objects.)
Methods
for analogous discussion of methods,
setClass
for details of specifying class definitions,
is
,
as
,
new
,
slot